CS:GO DOBBY

ADJUSTING THE SIGHT IN CS:GO

To configure the sight, you will need to understand the purpose of the following console commands:

SIZE OF THE SIGHT IN CS GO:

Of course, we start with the size of the sight, and so, the console command cl_crosshairsize is responsible for the size of the sight. Logically, the higher this parameter is, the larger the size of the sight you get. The following is an example:

setting the scope in cs go setting the scope in cs go setting the scope in cs go

cl_crosshairsize 0 cl_crosshairsize 5 cl_crosshairsize 10 POINT SIGHT IN CS GO:

If you need a point in the center of the sight, then this can be done using the cl_crosshairdot command, it has two parameters - 0 there is no point, and 1 - there is a point. adjustment of the sight in cs go, sight without a point adjustment of the sight in cs go, sight with a point

cl_crosshairdot 0 cl_crosshairdot 1 TRANSPARENCY OF THE SIGHT IN CS GO:

To enable the adjustment of the transparency of the sight, use the cl_crosshairusealpha command, which enables (1) / disables (0) the mode of transparency of the sight. If you want to set your transparency, set cl_crosshairusealpha to 1 (the default value). The transparency of the sight itself is set by the cl_crosshairalpha parameter. The value of this command can be from 0 to 255, the higher the value, the less transparent the sight becomes. Below are examples:

cl_crosshairalpha 0 - the most transparent sight. cl_crosshairalpha 127 - translucent (50% transparent). cl_crosshairalpha 255 is not at all transparent.

adjustment of a sight in cs go, transparency adjustment of a sight in cs go, transparency cl_crosshairalpha 127 cl_crosshairalpha 255

SIZE CROWD IN CS: GO To use the settings of the stroke of the sight, this parameter must be activated, i.e. turn on. There is a cl_crosshair_drawoutline variable for this.

cl_crosshair_drawoutline 0 - Sight stroke disabled. cl_crosshair_drawoutline 1 - stroke enabled.

If you turned on the stroke, that is, the commands with which you can set the thickness of the stroke (i.e. contour) of the sight in cs - the console command cl_crosshair_outlinethickness and as usual - the higher the value, the thicker the stroke of the sight.

setting the scope in cs go, without stroke of the sight setting the scope in cs go, with stroke cl_crosshair_outlinethickness 0 cl_crosshair_outlinethickness 2

THICKNESS OF THE LINES OF THE SIGHT IN CS GO: The line thickness is set by cl_crosshairthickness. The higher the parameter, the thicker the sight lines will be:

setting the sight in cs go, line thickness 0 setting the sight in cs go, line thickness 3 cl_crosshairthickness 0 cl_crosshairthickness 3

DISTANCE BETWEEN SIGHT LINES IN CS GO: Using the console variable cl_crosshairgap you can reduce or increase the distance between the lines of the sight. Those. if you need to narrow the scope - just set the negative (with a minus) value of this command, for example:

setting the sight in cs go, the distance between the lines of the sight setting the sight in cs go, the distance between the lines of the sight setting the sight in cs go, the distance between the lines of the sight cl_crosshairgap -5 cl_crosshairgap 0 cl_crosshairgap 5

SHOW / HIDE THE SIGHT The crosshair parameter is responsible for displaying or hiding the sight in cs go. Missing sight in the game? Check the value of this command in the console should be - crosshair 1

SIGHT STYLE IN CS GO: There are two ways to change the style of the sight. The first is through the game settings menu, the second is through the console.

1 way: Open the Settings> Game Settings> Interface Settings menu and select the appropriate style in the Sight Style field.

Sight adjustment in CS: GO

2 way: - this is through the cl_crosshairstyle console command, which has five meanings:

cl_crosshairstyle 0 - default (dynamic) cl_crosshairstyle 1 - default (static) cl_crosshairstyle 2 - classic cl_crosshairstyle 3 - classic (dynamic) cl_crosshairstyle 4 - classic (static)

ADJUSTING THE SIGHT COLOR IN CS GO: The cl_crosshaircolor team is responsible for setting various colors of the x-go sight, examples:

The value of the team

cl_crosshaircolor 0 red cl_crosshaircolor 1 green cl_crosshaircolor 2 yellow cl_crosshaircolor 3 blue cl_crosshaircolor 4 blue cl_crosshaircolor 5 own sight

And so, as you already understood, to set your scope color in cs go, you need to set the variable cl_crosshaircolor to 5. For this, write in the console and press ENTER:

cl_crosshaircolor 5 This variable includes the ability to use the other three console commands, which are responsible for color shades.

cl_crosshaircolor_r - share of red cl_crosshaircolor_g - share of green cl_crosshaircolor_b - share of blue You can set these parameters from 0 to 255.